It depends on the adhesive that was used to attach the vinyl wrap. If a high-quality adhesive was used, then it can be difficult to remove. However, if a low-quality adhesive was used, then it will be easy to remove.
There are a few different ways that you can remove vinyl wraps from gun magazines. One way is to use a heat gun. Another way is to use a razor blade. And yet another way is to use a soft cloth and some soap and water.
If you are using a heat gun, start by holding the heat gun about six inches away from the vinyl wrap. Slowly move the heat gun back and forth over the wrap until it starts to loosen up. Once it’s loose, you should be able to peel it off fairly easily.
If you are using a razor blade, start by gently scoring the vinyl wrap with the blade. You don’t want to cut through the wrap completely, just make shallow cuts through the top layer. Once you’ve scored the wrap, start peeling it off. It should come off fairly easily.
If you are using a soft cloth and some soap and water, start by wetting the cloth with soap and water. Then rub the cloth over the vinyl wrap. The soap and water will help to loosen the adhesive and the vinyl wrap should come off easily.
All of these methods will work to remove vinyl wraps from gun magazines. However, some methods may be easier than others depending on the type of adhesive that was used.