Are there any lubes known to be OK on the plastic over the long term?
There are a few things you should keep in mind when lubricating a polymer lower. First, make sure to use a quality lubricant that is designed specifically for firearms. Many shooters prefer MIL-SPEC grease, but there are also many good brands of synthetic oil on the market.
Next, be sure to apply the lubricant sparingly. A little bit goes a long way, and it’s easy to over-lube a firearm. Excess lubricant can attract dust and dirt, which can lead to reliability problems. Finally, be sure to clean your firearm thoroughly after lubing it. All of the accumulated dirt and grease will need to be removed if you want your weapon to run smoothly.
If you follow these simple tips, you should have no problem lubricating your polymer lower. Thanks for the question!
Yes, you can lube a polymer lower. There are a few different ways to do it, but the most common is to use a molybdenum disulfide-based lubricant. This will help to protect the polymer from wear and tear and make it easier for the bolt carrier group to move smoothly. You can also use a light coat of oil on the inside of the lower, but be sure to wipe it off afterward so that it doesn’t attract dirt and grime.
Another option is to use a silicon-based lubricant, which will provide a slippery surface that will help to reduce friction. However, this type of lubricant can attract dust and dirt, so it’s important to wipe it off after use.
Finally, you can also use a dry lubricant such as graphite or Teflon. These don’t provide as much protection as the other two options, but they will help to keep the bolt carrier group moving smoothly.
Whichever method you choose, be sure to apply the lubricant sparingly. Too much can cause more problems than it solves, so start with a small amount and work up from there if needed.
Yes, you can lube a polymer lower. It’s a good idea to do so to keep your gun functioning properly. Polymer is a synthetic material that can be prone to sticking and binding, so a little lubrication can go a long way in keeping your gun running smoothly. Just be careful not to use too much oil, as it can attract dirt and dust which can cause problems down the line. A light coating of lube should do the trick.
Yes, you can lube a polymer lower. There are many benefits to doing so. A properly lubricated polymer lower will lessen wear and tear on the active components, help prevent jams, and make the gun easier to clean. Likewise, lubricating your polymer lower will also make it more resistant to friction and heat damage.
When lubricating a polymer lower, it is important to use a quality lubricant designed for firearms. We recommend using Gunzilla Weapon Lube. This lube is specifically designed for firearms and will not harm your polymer lower. It is also very easy to apply and provides long-lasting protection.
To lubricate your polymer lower, simply apply a small amount of Gunzilla Weapon Lube to all moving parts. Work the lubricant into the action by cycling the charging handle and trigger several times. Wipe away any excess lubricant and you’re done!
Lubricating your polymer lower is a simple and easy way to prolong its life and keep it running smoothly. Be sure to use a quality lubricant designed for firearms and you’ll be good to go.
Yes, you can lube a polymer lower. However, the polymer is a very slippery material, so you need to be careful not to use too much lube or your firearm may become difficult to handle. Additionally, the polymer tends to absorb oil and cleaning solvents, so you may need to clean your gun more often if you use it regularly in dirty or oily environments.