So I wonder if anyone has tried this? What type of paint should I be looking into?
Polymer lowers can be painted using an enamel spray paint. The key is to apply several light coats to build up the desired color, rather than a few heavy coats. Also, make sure to avoid getting the paint on any of the moving parts, as it could affect their performance.
Yes, you can paint a polymer lower. However, there are a few things to keep in mind. First, you need to use a special kind of paint designed for polymers. Second, you need to make sure the surface is clean and free of any oils or other substances that might prevent the paint from adhering properly. Third, you need to be careful not to over-paint the surface, or else the paint may start to chip or peel off. Follow these tips and you should be able to successfully paint your polymer lower!
It is possible to paint a polymer lower, but it is not recommended. Polymer is a synthetic material that is not very compatible with paint, so the paint may not adhere well or may chip off easily. If you do decide to paint your polymer lower, be sure to use a primer designed for plastic surfaces and use several thin coats rather than one thick coat. Also, beware that some paints may react with the polymer and cause discoloration or other problems. It is always best to test a small area first before painting the entire lower.
If you are looking to add some color to your AR-15, one of the best ways to do so is with anodized parts. Anodizing is a process that creates a durable, corrosion-resistant coating on metal surfaces. This makes it ideal for AR-15 parts that will be exposed to the elements or harsh chemicals. Anodized parts are also available in a wide range of colors, so you can customize the look of your rifle. Just be aware that anodized parts may be slightly more expensive than non-anodized parts.
Another option for adding color to your AR-15 is to use cerakote. Cerakote is a polymer-based coating that can be applied to metal, plastic, and even wood surfaces. It is available in a wide range of colors, and it can provide a durable, protective finish. Cerakote can also be used to add graphics or other designs to your rifle. However, it is important to note that cerakote is not as durable as anodizing and it may require more frequent reapplication.
Finally, you could always have your AR-15 lower parts professionally painted. This is probably the best option if you want a truly custom look for your rifle. However, it is also the most expensive option. If you decide to go this route, be sure to find a reputable gunsmith or painter who has experience with AR-15s.
No matter which method you choose, adding color to your AR-15 lower parts is a great way to personalize your rifle and make it truly yours. Just be sure to do your research and choose a method that will best suit your needs.
Yes, polymer lowers can be painted. There are a few methods that can be used to do this, but the most common is to use a good quality 1-2 mil primer designed for plastic surfaces followed by a good quality automotive paint.
You will want to make sure that you thoroughly clean the surface of the lower before painting it. This includes removing any oils or other contaminants that may be on the surface. Once the lower is clean, you can sand it lightly with 1500-2000 grit sandpaper to create a rougher surface for the primer and paint to adhere to.
After priming and painting, you will want to sand again with 2500-3000 grit sandpaper and then apply a clear coat to protect the paint job.
Yes, you can paint a polymer lower. There are a few things to keep in mind, though. First, you’ll want to make sure that the lower is clean and free of any oils or other contaminants. Second, you’ll need to use a high-quality primer designed for use with polymers. And finally, you’ll need to choose a paint that’s specifically designed for use with plastics or polymers. With the right preparation and materials, painting a polymer lower is possible.