I am in the early stages of a new rifle build and have a cerakoting a barrel question. Can someone please give me the straight scoop on cerakote? I have zero experience with this and would appreciate any advice.
Cerakoting a gun barrel is a process that can be done at home with some simple supplies and a little bit of time. The first thing you will need to do is gather your supplies.
For this project you will need:
- A solvent degreaser (I used Brakleen),
- Automotive primer (I used Dupli-Color sandable automotive primer),
- Cerakote H-series Gun Coat in the color of your choice,
- Aerosol Topcoat in the color of your choice,
- High heat resistant automotive masking tape,
- Tack cloths,
- Foam brushes or low lint cotton rags.
Once you have all of your materials, the first step is to thoroughly clean the barrel. I started by using Brakleen to remove any grease, oil, or dirt. Once the barrel was clean, I used tack cloths to remove any residual dust.
The next step is to apply the primer. I recommend doing this in a well-ventilated area as the fumes can be strong. I also recommend wearing gloves and a respirator to protect yourself from the fumes. I applied the primer with a foam brush, making sure to evenly coat the entire barrel. After the primer was dry, I sanded it smooth with 400 grit sandpaper.
The next step is to apply the Cerakote. Again, I recommend doing this in a well-ventilated area and wearing gloves and a respirator. I applied the Cerakote with a foam brush, making sure to evenly coat the entire barrel. After the Cerakote was dry, I sanded it smooth with 400 grit sandpaper.
The final step is to apply the topcoat. I applied the topcoat with a foam brush, making sure to evenly coat the entire barrel. After the topcoat was dry, I removed the masking tape and admire my work.
Cerakoting a gun barrel is a great way to personalize your firearm and make it stand out from the crowd. It’s also a great way to protect your barrel from corrosion and wear. If you’re looking for a DIY project that will make your gun look great and protect it from the elements, Cerakoting is the way to go. Thanks for reading and feel free to leave any questions or comments below.