There are a few different ways that you can dye a gun grip, and the best method will depend on the type of grip you have. If you have a plastic or synthetic grip, you can use Rit Dye or another type of fabric dye. For a leather grip, you will need to use leather dye.
To dye a plastic or synthetic gun grip, start by mixing the fabric dye with hot water according to the package directions. Once the dye is mixed, submerge the gun grip in the dyebath and let it soak for the recommended amount of time. When the time is up, remove the gun grip from the dyebath and rinse it with clear water until the water runs clear. Allow the grip to air dry completely before using it.
To dye, a leather gun grip, start by applying a thin layer of leather conditioner to the grip. This will help to prevent the dye from soaking in too deeply and causing the leather to become stiff and dry. Next, mix the leather dye with water according to the package directions. Once the dye is mixed, use a sponge to apply it evenly to the grip. Let the dye soak in for the recommended amount of time, then wipe off any excess with a clean cloth. Allow the grip to air dry completely before using it.