How to get a stuck choke tube out?

There are a few ways to get a stuck choke tube out. The first is to try using a black powder gun cleaning rod. Simply insert the rod into the muzzle of the gun and tap it with a mallet until the choke tube pops out. If this doesn’t work, you can also try using an air compressor. Put the air compressor hose on one end of the chamber and blow into the other end until the pressure builds up enough to dislodge the stuck choke tube.

Finally, if all else fails, you can always take your gun to a qualified gunsmith who will be able to remove the choke tube for you.

If you’re trying to remove a stuck choke tube from your shotgun, there are a few things you can do.

First, try using a cleaning rod to see if you can push it out from the muzzle end. If that doesn’t work, you can try using a set of Vise-Grips or pliers to get a better grip on the choke tube and twist it out. Another option is to take the gun to a gunsmith or firearms dealer and have them remove it for you.

It can be quite tricky to get a stuck choke tube out, but there are a few things you can try. Firstly, make sure that the firearm is unloaded and pointed in a safe direction. Then, try using a pair of pliers to grab onto the choke tube and twist it counterclockwise. If that doesn’t work, you may need to use a choke tube wrench (which can be purchased at most gun stores or online). Place the wrench over the end of the choke tube and turn it counterclockwise until the choke tube comes loose.

If you’re still having trouble, you can try heating the end of the choke tube with a hair dryer or heat gun – this will often expand the metal enough to loosen the grip of the stuck choke tube. Be careful not to overheat the metal, as this could damage the firearm.

If your choke tube is stuck, there are a few things you can do to try and remove it. First, you can try using a clean cloth to grip the end of the tube and twist it counterclockwise. If that doesn’t work, you can try spraying some WD-40 or another lubricant into the area around the tube and letting it sit for a few minutes before trying to remove it again. Finally, if all else fails, you can take the gun to a gunsmith or other firearms expert to have them remove the stuck choke tube for you.

There are a few ways that you can go about getting a stuck choke tube out of your shotgun. One option is to use a pair of pliers to grip the end of the choke tube and twist it counter-clockwise. Another option is to use a choke wrench, which is a specialized tool designed for removing stuck choke tubes. Finally, you could also try heating the end of the choke tube with a blow dryer or heat gun; this will loosen the metal and make it easier to remove.

If none of these methods work, then you may need to take your shotgun to a gunsmith or dealer to have the choke tube removed.