Gun barrels can be parkerized by submerging them in a vat of boiling water mixed with sodium hydroxide (lye) for about 20 minutes. The sodium hydroxide etches the metal surface, creating an ideal surface for the parkerizing chemicals to adhere to.
After etching, the barrel is rinsed with cold water and then dipped in a vat of hot paraffin wax. The wax helps to seal in the parkerizing chemicals and protect the metal from corrosion. Finally, the barrel is allowed to cool, and then it’s ready to use.
Parkerizing is a great way to protect your gun barrel from corrosion and wear, and it’s also very affordable. You can find parkerizing kits at most gun stores, or you can order them online. Many companies offer parkerizing services if you don’t want to do it yourself.
Parkerizing a gun barrel is a simple process that only requires a few basic materials. The most important part of the process is making sure that the barrel is clean and free of any oil or grease.
First, you’ll need to gather up some supplies. You’ll need a container to hold the solution, something to stir with, a wire brush, and some metal polish. You can find most of these items at your local hardware store.
Next, mix 1 gallon of water, 1/2 cup of vinegar, and 1/4 cup of salt. Place the barrel into the container and stir it around until it’s fully coated. Let it sit for about 30 minutes before rinsing it off with warm water.
Once the barrel is rinsed, use the wire brush to scrub off any rust or corrosion. If there is any stubborn buildup, you can soak the barrel in the solution for a few more minutes before scrubbing again.
Finally, apply a thin layer of metal polish to the barrel and buff it until it’s shining.
Parkerizing is a process that creates a protective finish on firearms. The process can be done at home with simple supplies, or you can take your gun to a professional shop.
To Parkerize a gun barrel at home, you’ll need:
- Petroleum jelly
- Muriatic acid
- Water
- Steel wool
- Gun barrel (or any other steel surface)
- Pot or bucket to hold the solution
- Gloves
- Safety goggles
- Protective clothing (long sleeve shirt, pants, and shoes)
Here a step by step guide:
- Put on gloves, safety goggles, and protective clothing. Eye protection is essential when working with muriatic acid.
- Mix one part muriatic acid with nine parts water in the pot or bucket.
- Immerse the steel wool in the mixture and then rub it over the entire surface of the gun barrel. This will etch the surface and create a texture that will help the Parkerizing solution add here.
- Rinse the gun barrel with water and dry it completely.
- Apply a thick layer of petroleum jelly to any areas you don’t want Parkerized, such as the sights or any engraving.
- Immerse the gun barrel in the Parkerizing solution and let it sit for 15-20 minutes. The longer it sits, the darker the finish will be.
- Remove the gun barrel from the solution and rinse it with water.
- Allow the gun barrel to air dry or pat it dry with a clean cloth. The Parkerizing process is now complete!
Parkerizing is the process of applying a protective chemical coating to metal surfaces. It’s often used on firearms because it protects the metal from corrosion and rust.
To parkerize a gun barrel, you’ll need:
- a gun barrel
- degreaser or mineral spirits
- parkerizing solution
- a small brush or cloth
- paper towels or rags
- camouflage paint (optional)
- Clean the barrel with degreaser or mineral spirits to remove all grease and dirt. Wipe it down with a paper towel or rag to dry.
- Apply the parkerizing solution to the barrel using a small brush or cloth. Rub it in until the barrel is evenly coated.
- Allow the solution to sit on the barrel for the recommended time (usually about 10-15 minutes).
- Rinse the barrel with water and dry it off with a paper towel or rag.
- Apply a layer of camouflage paint, if desired. This will help further protect the barrel from rust and corrosion.
That’s it! Your gun barrel is now parkerized and ready for action.
Parkerizing a gun barrel is a process that creates a protective finish on the surface of the barrel. It’s often used on firearms to help protect them from rust and corrosion.
The process of parkerizing a gun barrel begins with cleaning the barrel thoroughly to remove all traces of oil or grease. The barrel is then immersed in a vat of parkerizing solution, which contains phosphoric acid and zinc dust. The acid reacts with the metal surface of the barrel, forming a protective coating of zinc phosphate. The barrel is then rinsed with water to remove any residual chemicals, and it’s ready for use.
Parkerizing is a simple and effective way to protect your gun barrel from the elements, and it’s something that can be done at home with relative ease. With a little time and effort, you can keep your gun barrel in good condition for many years to come. Thanks for reading!