What method is best for removing flash hiders? Any advice greatly appreciated
Johnny Answered question July 3, 2022
The process of removing an airsoft flash hider will vary depending on the brand and type of flash hider that is being removed. However, a few general steps that can be taken to remove most airsoft flash hiders are as follows:
- First, identify the type of screws or bolts that are holding the flash hider in place. Some screws may be hidden beneath stickers or protective caps.
- Once the screws have been located, remove them using a screwdriver or Allen wrench. Be careful not to strip the screw heads in the process.
- Gently pull on the flash hider to see if it is tight against the barrel. If it is not tight against the barrel, use a pipe wrench or pliers to loosen it.
- If the flash hider is still tight against the barrel, use a heat gun or blow torch to heat the area around the flash hider. This will help to break the sealant that is holding the flash hider in place.
- Once the flash hider has been heated, use a pipe wrench or pliers to remove it from the barrel.
With these steps, most airsoft flash hiders can be removed without damaging the barrel or flash hider itself. However, if you are unsure about how to remove your particular flash hider, it is always best to consult with an experienced airsoft technician.
Robert Answered question July 3, 2022