I have a complete AR-15 upper assembly and it has the typical flash hider. I want to change the muzzle device for something new. Can I take the flash hider off?
Mike Answered question July 3, 2022
The flash hider is an important part of the AR-15, and it must be removed carefully to avoid damage to the firearm. Here are a few steps that will help you remove the flash hider from your AR-15:
- Begin by ensuring that the AR-15 is unloaded and there is no magazine insert. You should also check that the chamber is empty.
- Next, locate the two set screws on either side of the flash hider.
- Using a hex key or Allen wrench, loosen the set screws until they are no longer tight against the flash hider. Do not remove the set screws completely, as they will need to be reinstalled later.
- Once the set screws have been loosened, gently tap on the flash hider with a rubber mallet or similar tool until it begins to loosen from the muzzle threads.
- Continue to apply gentle taps until the flash hider is completely removed from the AR-15.
- Inspect the flash hider and the muzzle threads to ensure that there is no damage. If everything looks good, you can reinstall the flash hider by following the above steps in reverse order.
Flash hiders are an important part of the AR-15, and they play a vital role in protecting the muzzle of the firearm. Be sure to remove them carefully and inspect them regularly to ensure that they are in good working condition.
Mike Answered question July 3, 2022